Recommended Maintenance

Valley Toyota, in collaboration with Toyota Canada, proudly presents this comprehensive recommended maintenance schedule tailored for your Toyota car, SUV, minivan, or truck.

As a Toyota owner, we recommend adhering to this maintenance schedule to ensure your vehicle’s optimal performance, safety, and longevity. Regular maintenance not only enhances your driving experience but also helps preserve your vehicle’s value.

For a detailed overview of the applicable minimum maintenance requirements specific to your vehicle, you can refer to the Owner’s Manual Supplement provided with your vehicle. Additionally, our knowledgeable service advisors are always available to assist you with any questions or concerns you may have about your vehicle’s maintenance needs. They can provide personalized advice and ensure that your Toyota receives the best possible care.

To conveniently schedule your next maintenance appointment, click here, or contact us directly. At Valley Toyota, we are committed to providing exceptional service and support to keep your Toyota running smoothly for years to come.

Vehicle Age in Months 6m 12m 18m 24m 30m 36m 42m 48m 54m 60m 66m 72m
Service #1
Service #2
Personalization
Service #3
Brake Fluid Replacement
Replace Iridium Spark Plugs

Service 1
• Check the installation of the driver’s floor mat
• Reset Maintenance Reminder Light or system
• Inspect wiper blades, linkage and washers for proper operation
• Inspect and adjust level – engine oil, brake fluid, engine/inverter coolant, power steering fluid and washer fluid
• Remove & inspect engine air filter
• Remove & inspect the cabin air filter
• Check and record tire tread depth. Examine tires for damage and uneven wear
• Remove wheels & visually inspect brake pads, calipers, rotors, brake lines and hoses
• Rotate tires (applicable to same size wheels, front & rear) or alternatively perform seasonal tire change-over.
• Record inspection results, measurements and component condition on inspection form and/or repair order

Service 2
• Check the installation of the driver’s floor mat
• Reset Maintenance Reminder Light or system
• Inspect all lights and horn for proper operation
• Inspect wiper blades, linkage and washers for proper operation
• Visually inspect drive belts
• Replace engine oil & filter (synthetic)
• Lubricate locks, latches and hinges
• Inspect and adjust level – engine oil, brake fluid, engine/inverter coolant, power steering fluid and washer fluid
• Remove & inspect engine air filter
• Remove & inspect the cabin air filter
• Remove wheels & visually inspect brake pads, calipers, rotors, brake lines and hoses
• Check and record tire tread depth. Examine tires for damage and uneven wear
• Rotate tires (applicable to same size wheels, front & rear) or alternatively perform seasonal tire change-over.
• Inspect differential and transfer case vents for obstruction
• Record inspection results, measurements and component condition on inspection form and/or repair order

Service 3
• Check the installation of the driver’s floor mat
• Reset Maintenance Reminder Light or system
• Inspect all lights and horn for proper operation
• Inspect wiper blades, linkage and washers for proper operation1
• Visually inspect drive belts and adjust tension if required
• Replace engine oil & filter (synthetic)
• Lubricate locks, latches and hinges
• Inspect and adjust level – engine oil, brake fluid, engine/inverter coolant, power steering fluid and washer fluid
• Remove & inspect engine air filter
• Remove & inspect the cabin air filter
• Remove wheels & visually inspect brake pads, calipers, rotors, brake lines and hoses
• Remove brake calipers and/or brake drums. Inspect and measure brake rotors, drums, pads and shoes
• Check and record tire tread depth. Examine tires for damage and uneven wear
• Rotate tires (applicable to same size wheels, front & rear) or alternatively perform seasonal tire change-over.
• Perform 12 Volt battery service and comprehensive electrical charging system evaluation
• Inspect valve clearance (audibly)
• Check steering gear, linkage and shock absorbers for looseness, damage or leakage
• Inspect ball joints and dust covers, driveshafts, chassis nuts & bolts for looseness or damage
• Inspect the fuel system for leaks or damage, inspect the condition of the fuel tank band, fuel tank cap gasket, fuel tank vapour vent system hoses, fuel lines and connections
• Inspect the exhaust system for leaks, damage or broken hangers

  1. Additional parts charges may apply if wipers are found to require replacement during inspection. Additional labour charges may apply for installation.
  2. Additional parts charge may apply if engine air filter is found to require replacement during inspection. No additional labour charges will apply for installation.
  3. Additional fees may apply for seasonal tire changes if tires are not mounted on rims or if cleaning of dirty wheels is required for proper storage.